|
 |
VXD Digger /
Derrick
42/45/47/50/53/55/60 Sheave
Heights |
|
INSULATED, FAILSAFE,
DIGITALLY-CONTROLLED
DIGGER DERRICKS
|
The Versalift VXD is the
ONLY digger derrick on the market designed and built from the ground
up as a microprocessor based, radio controlled machine |
|
|
|
The
Versalift VXD is the ONLY digger derrick on the market that offers
radio remote controls as standard equipment
The Versalift VXD is the ONLY digger
derrick on the market with a digger on the insulated third boom
stage. |
|
The Versalift VXD is the
ONLY digger derrick on the market with a 15,000 lb. winch on the
third boom stage.
The Versalift VXD is the
ONLY digger derrick on the market that offers automatic hydraulic
leveling and rotating buckets. |
|
|
|
The
Versalift VXD is the ONLY digger derrick on the market that offers
automatic hydraulic leveling pole claws.
The Versalift VXD is the ONLY digger
derrick on the market that offers fail-safe, electronically
controlled overload protection. |
|
The Versalift VXD is the
ONLY digger derrick on the market that offers fail-safe,
electronically controlled zone rating. |
|
|
VXD Model (Sheave Height): |
VXD-42 |
VXD-45 |
VXD-47 |
VXD-50 |
VXD-53 |
VXD-55 |
VXD-60 |
|
Side Reach |
32.68' |
35.68' |
37.68' |
40.68' |
43.68' |
45.68' |
50.68' |
|
Maximum Load Radius |
32.8' |
35.8' |
37.8' |
40.8' |
43.8' |
45.8' |
50.8' |
|
Minimum Load Radius @ 0° |
18.5' |
19.5' |
20.2' |
21.2' |
22.2' |
22.8' |
24.5' |
|
Intermediate Extension |
85.5" |
97.5" |
105.5" |
117.5" |
129.5" |
137.5" |
157.5" |
|
Maximum Diggig Radius |
28.4' |
31.4' |
33.4' |
36.4' |
39.4' |
41.4' |
46.4' |
|
Minimum Digging Radius |
14.2' |
15.2' |
15.9' |
16.9' |
17.9' |
18.5' |
20.2' |
|
Platform Capacity (lbs.) |
400 |
400 |
400 |
400 |
400 |
400 |
400 |
|
Miximum Jib Capacity (lbs.) |
1500 |
1500 |
1500 |
1500 |
1500 |
1500 |
1500 |
|
Insulation Gap |
40" |
40" |
40" |
40" |
40" |
40" |
40" |
|
Maximum Capacity (lbs.) |
52507 |
49636 |
47878 |
45444 |
43230 |
41851 |
38721 |
|
Maximum 10' Capacity (lbs.) |
15734 |
15628 |
15672 |
15593 |
15545 |
15520 |
15457 |
|
*With digger
and pole guide option. **All numbers based on 40" fram height.
Capacities dependent on chassis/outtrigger combination. |
|
|
STANDARD
FEATURES
- Simple electronic overload
protection system
- Wireless controls
- Load sensing planetary gearbox from boom
capacity (percentage of capacity)
- Insulation gap=40"
- Removable pole guides with 180° of
articulation
- Hydraulic pole leveling
- No requirement for pole guide sequencing
- Electronic auger overstow protection
(reduces hydraulic plumbing and heat build during digging)
- Full dielectric protection with the rope on
the sheave
- Full dielectric protection during digging
operation
- Lower control station to override wireless
controls
|
Click on Chart larger View |
|
|
PLATFORM FEATURES
- Single or dual 24 x 24 x 42 platforms with
90° rotation (hydraulic leveling standard) with capacities up to
400 lbs. each (option)
- Standard auto boom sequencing (with the
controls in the upper control holder, the fiberglass boom will
extend first and retract last)
- Automatically senses operator in the
platform and adjusts overturning moment to meet ANSA A10.31, ANSI
A92.2, and CSA-C225-M88 Requirements for Stability for a Manlift
(standard)
- Optional Hydraulic tool power at the upper
controls
|
|
OPTIONS
-
Electronic engine
start/stop control
-
electronic variable
throttle control
-
6,000, 8,000 and 12, 000
FT*LB single speed
-
8,000 and 12, 000 two
speed diggers with automatic digger stop/shift/start
-
12,000 and 14,000 FT*LB
hydrasync diggers
-
1,500 LB automatic
leveling jib pole attachment
-
Extended shaft on winch
-
Auxiliary A-frame
outriggers
-
Main or auxiliary radial
outriggers
-
out and down riggers
-
Subframe
|
CONTACT BOB'S
SERVICES FOR
VERSALIFT
FINANCIAL SOLUTIONS
From Vendor
Leasing Financial Corp. |
© Copyright 2000-2004, Bob's Services, Inc.
All rights reserved.
The logos, names, and photos used in these pages are the property of their
respective owners.
Last revised: April 25, 2004 01:03 PM
. |
