50 Gallon Reservoir
(Upright or Side Mount)

Foam-retarding diffuser built into reservoir prevents pressure build-up, foaming or oil blow-over.  Breather filler cap with built-in 40 micron air filter helps keep system clean.  All porting is pipe-threaded.  All parts in the system are non-corrosive and require no painting.  Two 2" N.P.T. type aluminum work ports are located on the bottom of the reservoir.

Super strong one piece polyethylene reservoirs

One piece molding means no seams to leak, no rust and no welding slag to breed contamination.  The 50 gallon reservoir is available upright or side mount.  Empty weight (without hardware) is only 32 lbs., yet reservoirs have more impact strength than a comparable steel unit.

Reservoirs carry a lifetime warranty when mounted on the original chassis. All system hoses, hardware, and the reservoir can be shipped via UPS.

Side mount comes standard with stainless steel straps and aluminum mounting brackets.  Installs in half the time of conventional systems. All reserviors come standard with a five inch sight gauge with thermometer, as well as an additional pot available for an optional temperature sensing switch.
	Side Mount Reservoir

35 GALLON RESERVOIR

Designed to be the easiest and most quickly installed reservoir of its size.  For use on applications such as: Bump Trucks, Central Hydraulic Systems, Tow Vehicles, Aerial Devices and Platform Utility Equipment.
Lifetime warranty Contaminant free 3" sight gauge with thermometer Muncie's patented return line diffuser Rear accessory ports Extremely lightweight (reservoir weighs 25 lbs) Optional return line filter (diffuser not used with filter)

75 GALLON RESERVOIR

The upright 75 gallon (at 80% full point. Actual holding capacity is 90 gallons.)  polyethylene reservoir provides a better safety head on trailers using larger cylinders. Empty weight (without the hardware) only 48 lbs.
Two 2" N.P.T. type aluminum works ports are located on the bottom of the reservoir.

ALUMINUM AND STEEL RESERVOIRS

As a complement to our line of Polyethylene Reservoirs, we have our aluminum and steel models for those continuous-duty applications where metal tanks are preferred.  For the high-profile fleets, the pleasing aesthetics of the aluminum models are often the choice.

50 & 70 Gallon Upright 

• Muncie's patented return line diffuser

• Internal splash baffle

• Easy-to-read 5" fluid level and temperature sight gauge

• 3/4" N.P.T. magnetic drain plug

• Easy-mount design with integral mounting flange, eliminates the use of saddles and straps

• 3/4" N.P.T. top accessory or optional breather port

• Filler/breather assembly with nylon strainer and 1/4 turn 40 micron chromed filler cap

• Two 2" N.P.T. bottom work ports

• Stamped ends for maximum strength

55 & 75 Gallon Side Mount

• Muncie's patented return line diffuser

• Large internal splash baffler

• Prism type level gauge

• 3/4" N.P.T. magnetic drain plug

• Formed mounted brackets with rubber isolation mounting straps

• 3/4" N.P.T. top accessory or optional breather port

• Three 2" N.P.T. work ports for ease of installation

• Filler breather on assembly with nylon strainer and 1/4 turn 40 micron chromed filler cap

• Stamped ends for maximum strength

• Optional stainless steel mounting straps

15 & 35 Gallon Steel Side Mount

These smaller side mount reservoirs are also available with the same high quality as the larger sizes.  Call Bob's Service for more information about these fine products.

CONSOLE SHIFTING PACKAGES

In-Cab Control Console for Dump Bodies
Control all dumping operations from truck cab