E/EH SERIES DUMP PUMPS
All cast Iron three piece construction

The E/EH Series dump pumps have long been the preferred standard for many original equipment manufactures.  Naturally, they should be the first choice as the replacement pump for your system.

• Speeds to 2500 RPM
• Pressures to 2500 PSI
• Pump capacities @ 1000 RPM for 23 & 27 GPM (E Series), 28 & 36 GPM (EH Series)
• PTO  Direct Mount or twin shaft remote

Remote Mount (Bottom Right)

• Valve Spool Safety Cap Standard (for pull-out cable)
• Externally interchangeable with Commercial Shearing, Figge-Hall, Permco
• Integral Valve Capable of 2-line or 3-line syste.
• Lever or optional integral air shift (meters on down stroke)
• Heavy duty roller bearings
• Extra long assembly studs for pump support on direct mount unites
• Full two year warranty

• Two versions available for use with either single or double acting hoists
• Pump Capacities: 6, 11, 15 GPM @ 1000 RPM, 2000PSI

Remote Mount (bottom right)

• One year warranty
• Speeds to 2500 RPM
• Pressures to 3000 PSI
• Heavy duty roller bearings
• Lever shift (detent or spring return)
• Optional air shift, cable shift
• Lower work port relief standard
• Cast Iron Construction fully rebuildable
• Integral valve capable of either 2/3-line or 3/4 line system

LOWER OPERATING COSTS.  When the Power-Miser is operated in the Off mode, only enough oil flow to lubricate the pump is permitted.  The off Mode requires less horsepower, increasing fuel economy.  For continuous duty operation, Power-Miser offers a practical alternative to the expense of clutches and their maintenance.

The basic Power-Miser System is comprised of three elements: a Pump, A Power-Miser Valve, and a Bleed off Valve.  Each has been specially designed for Power-Miser operation.

Maximum route efficiency is accomplished without fear of excessive hydraulic flow, shutdown or heat buildup,

The Live Pak is available in eight different pump sizes and controlled flows to 832 GPM.

POWR-PRO PUMP

The Powr-Pro Pump System is an on-demand live power hydraulic system ready for work with a single flip of the switch.  The pump can be driven by either the engine crankshaft or flywheel PTO and contains no clutches or gears or disengage, thus providing increased productivity for all solid waste packers and other mobile power applications.  The Powr-Pro Pump System carries a full Two Year Warranty.

• All cast Iron, three piece construction
• System matched components
• Speeds to 3000 RPM
• Pressures to 3000 PSI
• 7 standard sizes: 19, 23, 25, 27, 31, 35, 40, GPM @ 1000 RPM

COMBO KIT FOR MOVING FLOORS

Designed for multi-function rigs, the Muncie Combo Kit hydraulic system easily handles the increased pressure and flow requirements found on ejection and moving floor systems.

Full flow characteristics of the Muncie Combo Kit give longer service, reduced heat generation, and the convenience of faster offloads.  The Muncie Combo Kit is destined to be your fist choice for day in, day out, and all-day-long performance.

The Muncie Combo Kit reduces wasted horsepower.  The efficient design saves engine RPM and meets higher pressure needs while it reduces damaging heat generation.  The Combo Kit is displayed above with your choice of dual or single lever shifting options.