AUXILIARY PRODUCTS

MSV SERIES VALVE
Two Position Selection Valve

The MSV Series two position, three way selector valve provides a simple means of directing oil flow into tow separate hydraulic circuits or can be used as a low pressure bypass back to the reservoir.  Valve spool design is such that as the spool starts to move and open up the one port, the other port will begin to close.  The valve has a nominal flow capacity of 60 GPM with pressures up to 3000 PSI.
  • Integral mounting flange interchangeable with existing competitive product
  • High grade cast iron body
  • Chrome plated spool
  • Optional pipe or straight thread ports
  • Optional integral air shift
  • Universal shifter components fit either end of spool

 

PFD-30 PRIORITY FLOW DIVIDER

Priority Flow Divider valve provides simultaneous flow for two separate hydraulic circuits from a single pump.  The priority flow is adjustable from 0 to 30 GPM (114 LPM). The excess or bypass flow can be used in a second circuit or directed to reservoir.
  • Max. Flow - 30 GPM (114 LPM)
  • Max. Pressure - 3000 PSI (207 BAR)
  • Ports - 3/4" N.P.T. Std.
  • Optional SAE O.D.T. Ports

 

RV-20, RV-60 PILOT OPERATED RELIEF VALVES

Maintaining a constant maximum pressure with widely varying flow rates. Can be inline or tee mounted.

Model - RV-30
  • Max. Flow - 30 GPM (114 LPM)
  • Adjustable Pressure Range - 300-3000 PSI (21-207 BAR)
  • Ports - .10 SAE Straight Thread [Preset at 1000 PSI (69 BAR)]

Model - RV-60

  • Max. Flow - 60 GPM (227 LPM)
  • Range - 300-3000 PSI (21-207 BAR)
  • Ports - .16 SAE Straight Thread [Preset at 2000 PSI (138 BAR)]

 

CUSTOM-PRODUCED CABLE CONTROLS

Made in any length and shipped in a matter of hours.

Choose from a variety of cables and control heads to meet any job requirement.  All cables are designed to give long, trouble-free performance.  For a variety of special and heavy duty cable control systems.  Muncie's Remote valve Control Systems brochure is available upon request.  Remote Valve Control Systems allow in-cab direct control of PTOs, pumps and valves with a push-pull cable.

 

 RETURN LINE FILTERS
Check filter element condition at a glance

Muncie's RETURN LIN FILTERS with easy-to-read Filter Condition Indicator reduce the possibility of contamination in hydraulic systems.  Spin-off/throw-away elements make replacements fast and easy.  Filters available in external or tank-mounted models.
  • Available in 25, 50 and 100 GPM designs
  • Full flow filtration
  • Easily installed and maintained
  • 10 or 25* micron filtration
  • 15 PSI by-pass
  • 100 PSI maximum working pressure
  • Optional gauge port locations

*On 100 GPM model

 

 

 

© Copyright 2000-2004, Bob's Services, Inc.  All rights reserved.
The logos, names, and photos used in these pages are the property of their respective owners.
Last revised: April 25, 2004 01:22 PM .